Rear derailleur hangers

Rear derailleur hangers
$20
OPEN Touch Up Paint

With a go-anywhere, do-anything bike, an accident is sometimes unavoidable. To repair scratches and chips, use our touch-up paint. Each order contains one colour, select below.

OPEN Touch Up Paint
$30
Custom OPEN Carbon-Ti thru axles

Custom OPEN Carbon-Ti thru axles
$75
MultiStop set of 3 - for U.P./U.P.E.R./WI.DE./ONE+
MultiStop set of 3 - for U.P./U.P.E.R./WI.DE./ONE+

Set of all 3 MultiStops for the U.P., U.P.P.E.R. and ONE+ frames. Versions for 2x, 1x and Di2 included.

For those wishing to run 1x and a dropper post internally, we recommend using the 2x MultiStop if you drill out the front derailleur entry channel for the dropper post.

NOTE: For the U.P., U.P.P.E.R., WI.DE. and ONE+, every frame size uses the same MultiStop so they are not frame size-dependent.

MultiStop set of 3 - for U.P./U.P.E.R./WI.DE./ONE+
$50
In stock
add
eTap Shift Kit
eTap Shift Kit

Set of eTAP specific MultiStop headtube cable entry (one hole for brake cable only), rubber bottom bracket plug (can be used for Shimano DI2 also) and chain stay cable exit plug.

eTap Shift Kit
$26
In stock
add
Bottom bracket cable guide

Bottom bracket cable guide
$10
Cable exit guide - for U.P./U.P.P.E.R./ONE+
Cable exit guide - for U.P./U.P.P.E.R./ONE+

Cable exit guide for any mechanical rear derailleur cable (Shimano or SRAM) exiting from the dropout of the U.P. and U.P.P.E.R. or from the chainstay of the ONE+ frame.

Cable exit guide - for U.P./U.P.P.E.R./ONE+
$6
In stock
add
Rubber Shimano DI2 cable exit guide - for U.P./U.P.E.R./WI.DE./ONE+
Rubber Shimano DI2 cable exit guide - for U.P./U.P.E.R./WI.DE./ONE+

Chainstay cable exit guide for U.P., U.P.P.E.R., WI.DE. and ONE+ to be used with Shimano DI2 cable.

Rubber Shimano DI2 cable exit guide - for U.P./U.P.E.R./WI.DE./ONE+
$2
In stock
add
Cable liner for shift cables
Cable liner for shift cables

To reduce friction and prevent any housing fraying, use these liners in your MultiStop headtube insert as well as your BB guide.

NOTE: This item is sold individually, so please order 4 if you need a full set for a double chainring set-up and 2 for a single chainring set-up.

See this video for assembly instructions.

Cable liner for shift cables
$2
In stock
add
Foam liner
Foam liner

Prevent your brake hose and shifter housing or wires (if you use any) from rattling with this foam liner. 2m is enough for one bike. Instructions in the Tech info videos.

Foam liner
$10
In stock
add
Seattube collar - all OPEN models
Seattube collar - all OPEN models

Seattube collar suitable for all OPEN models, includes bolt and 4-circle logo (with one of the circles doubling as the bolt thread).

Seattube collar - all OPEN models
$36
In stock
add
Chainstay protector - WI.DE.
Chainstay protector - WI.DE.

Steel chain stay protector for WI.DE.

Chainstay protector - WI.DE.
$6
In stock
add
Chainstay protector - for O-1.0/1.1
Chainstay protector - for O-1.0/1.1

Steel chainstay protector for the previous generation (O-1.0 and O-1.1) hardtail frames.

Chainstay protector - for O-1.0/1.1
$30
In stock
add
MultiStop - for O-1.0/O-1.1
MultiStop - for O-1.0/O-1.1

MultiStop headtube cable entry for the previous generation hardtail (O-1.0 and O-1.1). Choose the appropriate version for your frame size (S/M frames use different MultiStops than L/XL size) and type: single chainring (1x) mechanical shifting or electronic (Di2) shifting.

If you wish to run a single chainring and dropper post internally, we recommend the 2x MultiStop (see complete 2x shift guide set - for O-1.0/O-1.1) and drill out the front derailleur entry channel for the dropper post.

MultiStop - for O-1.0/O-1.1
$34
Complete 2x shift guide set - for O-1.0/O-1.1
Complete 2x shift guide set - for O-1.0/O-1.1

Complete set of 2x MultiStop headtube cable entry, chainstay cable exit & BB guide for the previous generation hardtail (O-1.0 and O-1.1). Choose the appropriate version for your frame size (S/M frames use different MultiStops than L/XL size).

If you wish to run a single chainring and dropper post internally, we recommend this 2x MultiStop and drill out the front derailleur entry channel for the dropper post.

Complete 2x shift guide set - for O-1.0/O-1.1
$34
Bottom Brackets for O-1.0-/O-1.1

Bottom Brackets for O-1.0-/O-1.1
$50
Headsets for previous generation frames

Headsets for previous generation frames
$55
THM M3 crankset - XX1 spider 175mm
THM M3 crankset - XX1 spider 175mm

The world's lightest mountain bike crank, perfect to complement our super-light frames. This crank is suitable for Bbright (O-1.0/1.1) and BB92 (ONE+) frames.

Comes with BB and regular XX1 spider. A Boost-specific spider will be available before the end of the year.

Crank length: 175mm

Weight: 340g (cranks & axle),

Spider: XX1 (31g)

THM M3 crankset - XX1 spider 175mm
$966
In stock
add
Content
From:
To: